7 Common Mistakes When Installing Awning Window Philippines
Awning Window Philippines is favored among Filipino homeowners because of its practicality, aesthetics, and capacity to let in breezes while filtering out rain. However, due to careless installation, such windows may not function properly, resulting in leaks, difficulties in operation, and, in some cases, damage. Recognizing these issues may assist in preventing unnecessary expenses and assuring the durability of the windows.
What are Awning Windows?
An awning window is a type of window that opens outward from the bottom but is hinged at the top. It creates a roof-like structure, allowing air in and rain out. These windows are quite effective, especially in tropical areas such as the Philippines, where rain showers may happen at any time. They are typically found in spaces like kitchens, bathrooms, or other places requiring ventilation.
Common Mistakes to Avoid When Installing Awning Windows
Incorrect Measurement and Sizing
The improper measurement is one of the primary errors that occur most of the time while installing an awning window Philippines. If the aperture is poorly measured, then the installation may result in a loose window that won’t fit well causing leaks. Over the years such holes may create drafts and even cause damage due to excess moisture.
Improper Sealing and Waterproofing
Waterproofing is of utmost importance to awning windows Philippines and other tropical countries where rainfall is frequent. A lack of proper sealing can result in leakages which can destroy internal walls, floor coverings, and even electrical installations. Sometimes, the sealant used may differ from the prevailing climatic conditions and hence wear off faster.
Neglecting the Building Codes and Regulations
The installation of awning window Philippines must be completed according to acceptable practices and local building codes. If this is not adhered to, there is the possibility of being fined or having to carry out a reinstallation. Such regulations may stipulate provisions on the positioning of windows in a building especially if it is a tall structure or in a cyclone-prone region.
Choosing the Wrong Material
Awning window Philippines can be made from a variety of materials such as wood, aluminum, and uPVC. Each material has its merits, but not all of them are ideal for the moist and corrosive climate in the Philippines. For instance, the frames made of wood are likely to twist and decay more rapidly in tropical climate zones, whereas some types of placement metal tend to succumb to rusting as time passes.
Incorrect Placement
The advantages of awning window Philippines are highly dependent on their positioning. If such windows are located in places with low sun exposure and not enough wind, they may fail to render the greatest ventilation and energy efficiency. On top of this, windows installed in the vicinity of overhanging structures may have their extent of opening compromised owing to obstacles to full rotation.
Improper Frame Installation
A wooden frame is, of course, required for awning window Philippines. However, in the presence of incorrect installation, this changes due to uneven mounting of the windows. This may result in difficulties in the fastening of the window, or bring about an inappropriate position of the window that may lead to moisture seeping in gaps in the closure. Any distortion in the fitting of the frame, especially in the long term, may result in the whole window sagging inwards and hence compromising the structure.
Ignoring Maintenance Requirements
Once installed, it is important to carry out proper and periodic maintenance of awning window Philippines from time to time. However, most homeowners tend to forget simple activities like cleaning, lubricating, or inspecting. This can contribute to problems such as rust, stuck hinges, and wear and tear on seals.
Key Takeaway
Awning window Philippines may prove to be useful in adding ventilation and protection from outside elements. However, these beneficial aspects can be lost due to various mistakes made in the installation. The usual mistakes are wrong measurement, inadequate sealing, violation of building regulations, inappropriate materials, wrong installation, and lack of upkeep.
To counter these issues, homeowners should engage the services of skilled installers, use good-quality materials, and ensure consistent maintenance. Proper planning and execution during installation can ensure that the awning window Philippines will be an aesthetically pleasing and functional addition to the house and rather enhance its value and comfort for decades.
